So, to explain a little here about the power points install, I looked around behind the pillar and side panels and the only spot in the body metal that had an existing hole in it was at the top rear corner of the 2nd row doors.
So I chose that spot because I didn't want to drill unnecessary holes in the body metal. It was also a good location that could be accessed from both the 2nd and 3rd row seating areas.
PLUS, I can easily see if the kids leave something plugged in too.
Even though I can shut power off at will from the switch on the dash.
However they only work if the key is in the "On" OR "Ign" position, so I am going to change that so it can be on in the "Off" position OR "Accessory" POSITION.